hu66-1
hu66-2hu66-2hu66-3

PRODECODER HU66 -TURBO DECODDER tool to open decoding VAG cars gen.1

400.00 

HU66 vag Gen.1 2016 Wholesale best price key tool turbo prodecoder promotion price valid for febriary

Prodecoder special oferta prodecoder vag hu 66 1 gen (previous version)

WITH THIS TOOL  NEED TESTER KEY TO SEE THE LOCK STATUS AND ORIENTATION!

This tool is often called “а masterpiece of precision mechanics” and what it does is to allow professionals to open, in a non-destructive way, doors and ignition locks of VAG Group (VW, AUDI, SKODA, SEAT, PORSCHE, ) in just a few seconds. Additionally after opening, the lock code can be read for key reproduction.

All VAG models from 1998 till 2005 and SOME models of Skoda (2011-2013) use door locks from Generation 1, ude your tester key to check the lock !

All ignition locks of the VAG Group from 1998 untill 2014 are Generation 1!

Product Description

HU66 vag Gen.1 2016 Wholesale best price key tool turbo prodecoder promotion price valid for febriary

Prodecoder special oferta prodecoder vag hu 66 1 gen (previous version)

WITH THIS TOOL  NEED TESTER KEY TO SEE THE LOCK STATUS AND ORIENTATION!

This tool is often called “а masterpiece of precision mechanics” and what it does is to allow professionals to open, in a non-destructive way, doors and ignition locks of VAG Group (VW, AUDI, SKODA, SEAT, PORSCHE, ) in just a few seconds. Additionally after opening, the lock code can be read for key reproduction.

All VAG models from 1998 till 2005 and SOME models of Skoda (2011-2013) use door locks from Generation 1, ude your tester key to check the lock !

All ignition locks of the VAG Group from 1998 untill 2014 are Generation 1!

Important! Training process is necessary to learn the opening procedure. If you haven’t been trained and you have no experience, please keep in mind that the warranty of the manufacturer will not apply.

The tool comes with  with Video manual made with your unique serial number, General Video Manual with subtitles in English and PDF Manual. This serves as a guarantee that the tool is tested and shipped in perfect working conditions.

How to use the Turbodecoder Prodecoder –  short instructions:

1 Set up the TURBODECODER /   PRODECODER

-close the gate wheel

-turn left the turbo wheel / back one / next to the point of the middle wheel / gate wheel /

-open the gate wheel by pull it back

-rise the pins open to the maximum position with your set up device

-close the gate wheel / push it to the front /

-turn the back wheel / turbo wheel / maximum to the right

Now your turbodecoder prodecoder is ready for a lock opening..

2 Checking the generation of the lock by using the tester key

-we put the tester key in the lock: if it stops on nothing you just reverse the key, then if it stops on green metal blade point it means that the lock is second generation type. If it stops on red pointit means that it is a first generation lock. After correct putting it in look on what side is the plastic head green points – left or right. The orientation point of your turbo prodecoder must follow the same direction. Note* on the VAG hu66 HORISONTAL LOCKS the orientation points must be up.

3 Putting the Turbodecoder in

Close gate wheel

Turn turbo whell maximum to the right

Put the Turbodecoder in with a closed gate, and holding the gate wheel with points directed to the same side as the keytester pointed.

4 Starting to open the lock

to open a lock very important is how strong you make a tension. (tension wheel)

too weakly – do not open a lock or will open very slow / arround 2-3 min. /

too strong – break a tool or risk of tool deformation.

-make a tension left (turn the tension wheel left) and turn the turbo wheel on line number 1 (turn the turbo wheel to the first line on the gate) and return the turbo wheel right and check a little bit

-make a tension right (turn the tension wheel right) and turn the turbo weel on line number 1 (turn the turbo wheel to the first line on the gate) and return the turbo wheel right and check again little bit and conversely repeat it 4-5 times from 1-1, 1-1, 1-1, 1-1 then 2-2, 2-2, 2-2, 2-2, and progressively so on, until you open the lock

-when the turbodecoder is turned to the open position stay in this position and turn the turbo wheel to the point on the gate wheel

-juggle a little bit

-turn to the other side

-juggle a little bit

Now your turbo prodecoder  pass tru the neutral lock point exactly as the original key – no stacks… smooth.

At that point you memorise where is your indicative line of the back wheel. If later you need to read the key code go in that exact point and do the reading.

5 Take off torbodecoder

-put the line (turbo wheel) next to the point (gate wheel)

-moving the gate wheel up and down push the gate at the same time until you close it

-turn to the right (turbo wheel)

-extract the tool holding the tension wheel

6 Reading code

-open the gate

-turn the line (turbo wheel) next to the point (gate wheel)

-check the pin depts on the tool and write them down on a piece of paper

All information on the use and handling this product are contained in the rules, which the buyer is obliged to acknowledge that he is familiar with their content and accept them before purchasing.